Numerical Experiments to Obtain the Scaling Laws for Neutron Yield on Mather-Type Plasma Focus Machines Below 500 Joules

Authors

  • A. Singh INTI International University, 71800 Nilai, Malaysia
  • S. Lee INTI International University, 71800 Nilai, Malaysia; Institute for Plasma Focus Studies, Chadstone, Australia; Universiti Malaya, Kuala Lumpur, Malaysia
  • S.H. Saw INTI International University, 71800 Nilai, Malaysia; Institute for Plasma Focus Studies, Chadstone, Australia

DOI:

https://doi.org/10.70530/kuset.v10i2.412

Keywords:

Lee‘s model code, Neutron yield, Scaling law, Plasma focus neutron scaling laws

Abstract

In this paper, we explain how we have fitted Lee‘s 5-phase and 6-phase model code to analyze the current waveforms of 6 small plasma focus machines (below 500 Joules) working in deuterium gas medium. Using the information from the code fitted to these current waveforms, the scaling laws for these small-energy machines were obtained as follows:

Published

2014-12-31

How to Cite

Singh, A., Lee, S., & Saw, S. (2014). Numerical Experiments to Obtain the Scaling Laws for Neutron Yield on Mather-Type Plasma Focus Machines Below 500 Joules. Kathmandu University Journal of Science Engineering and Technology, 10(2). https://doi.org/10.70530/kuset.v10i2.412

Issue

Vol. 10 No. 2 (2014): Kathmandu University for Science, Engineering and Technology (KUSET)

Section

Original Research Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

This work is licensed under CC BY-SA 4.0