Estimation of electron temperature in atmospheric pressure dielectric barrier discharge using line intensity ratio method

Authors

  • R Shrestha Department of Natural Science, Kathmandu University, Dhulikhel, and the Department of physics, Napal Banepa Polytechnic College, Kavre,
  • RB Tyata Department of Electrical, Khwopa College of Engineering, Libali-2, Bhaktapur
  • DP Subedi

DOI:

https://doi.org/10.70530/kuset.v8i2.340

Keywords:

Physics, Engineering

Abstract

Dielectric Barrier Discharge was produced by applying high voltage AC source of frequency (10-30 KHz) and potential difference of (0-20) kV across two parallel plate electrodes with glass as dielectric barrier. Optical emission spectroscopy was used for the characterization of the discharge produced at atmospheric pressure. The emission spectra in the range of 200 nm to 850 nm have been analyzed to estimate the electron temperature by line intensity ratio method. The results showed that the electron temperature is about 0.9 eV.

Published

2013-01-03

How to Cite

Shrestha, R., Tyata, R., & Subedi, D. (2013). Estimation of electron temperature in atmospheric pressure dielectric barrier discharge using line intensity ratio method. Kathmandu University Journal of Science Engineering and Technology, 8(2). https://doi.org/10.70530/kuset.v8i2.340

Issue

Vol. 8 No. 2 (2012): Kathmandu University for Science, Engineering and Technology (KUSET)

Section

Original Research Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

This work is licensed under CC BY-SA 4.0

Most read articles by the same author(s)